10KW Biogas/natural gas generator

gas generator
2)10KW-1100KW
3) key / automatic start
4)110V-480V AC, 50Hz / 60Hz
5) low noise level
10KW GAS GENERATOR SET

ELECTRIC GOVERNOR
FUEL&GAS MIXER(MADE IN USA)
REDUCING VALVE(MADE IN ITALY)
CONTROLE PANEL(NORMAL ONE)
1. Key switch control panel
i) Unit voltage, tri-phase load current and frequency display.
ii)Power and Power factor display
iii)Water temperature,engine oil pressure,battery voltage,speed and running hours display on the LCD screen.
iv) Audible and visual alarm lamps and buzzers
2. Control parts:
Start/stop key switch, start button, emergency stop button, voltage regulation resistance, speed regulation resistance. Voltage phase switch ,Electric current phase selecting switch.
3. Protection setting for engine
For emergency shut down, overfeed, high water temperature, low oil pressure.When some accidents appear, The digital Protector can shut down immediately, giving the battery voltage alarm and DC electrical source alarm. European extremity, steady wiring, and it can easily dismantle and install.
CONTROL PANEL(ADVANCED ONE)
INSIDE OF CONTROL BOX
FIRE DAMPER
1. Main technical parameters of Genset
Model of generating sets
CR-10GFQ
Model of engine
CR-2100Q
Rated current A
18A
Rated power KW
10kw
Rated speed r/min.
1500
Rated voltage V
400V /230
Rated frequency Hz
50
Supply method
3 phases 4 lines
Excitation method
brushless
Starting method
24V DC starter
Cooling method
water cooled
Speed modulate method
Electronic control
Overall dimension L×B×H(mm)
1450x750x1100mm
2 .Main technical data of Engine
Model of engine
CR2100Q
Rated power/speed
14KW/1500rpm
Specific heat consumption
≤11000KJ/KW.h
H2O
no liquid state water vapour in natural gas
Number and layout of cylinders
2 cylinders inline
Type
Four stroke, water cooled, spark plug ignition
Bore diameter
100mm
Stroke
115mm
Total displacement
1.8L
Compression ratio
11.5:1
Speed regulation
Electronic governor
Lubricating method
Pressure and splash lubrication
Natural Gas inlet pressure
0.8kpa-2kpa
1) Adopting advanced Hall ignition sensor and Highly capable ignition system, the engine ignition will be more reliable, and easier to start.

2) Main control parts are all the most advanced imported ones, to make more stable and reliable running.

3) Several gensets can be parallel connection or parallel net, which can increase the total power range. In addition,the gensets can take maintenance in different times,which will make little influence to the normal performance of gensets.

4) Low gas pressure is acceptable, no need to set up specified gas storage tank , which will save the investment and enhance the efficient output power .

5) Self-contained parts of gensets needs few accessories

6) Economical and low-cost running.

7) The fuel of gas reduces the accumulated carbon, which lessen the damage to between cylinder and valve, therefore, it will largely prolong lifetime.

8) The installation of high-quality control cabinet set enable mutiple protection, which enhance the safety for the running of gensets.