Monday, September 19, 2011

60KW Biogas/natural gas generator

gas generator
1)Power range:10kw-1100kw
2) low operation cost
3) key / automatic start
GAS GENERATOR

FUEL&GAS MIXER(MADE IN USA) GAS PRESSURE REDUCING VALVE(MADE)
ELECTRIC GOVERNOR FIRE DAMPER

CONTROLE PANEL(NORMAL ONE)
1. Key switch control panel
i) Unit voltage, tri-phase load current and frequency display.
ii)Power and Power factor display
iii)Water temperature,engine oil pressure,battery voltage,speed and running hours display on the LCD screen.
iv) Audible and visual alarm lamps and buzzers
2. Control parts:
Start/stop key switch, start button, emergency stop button, voltage regulation resistance, speed regulation resistance. Voltage phase switch ,Electric current phase selecting switch.
3. Protection setting for engine
For emergency shut down, overfeed, high water temperature, low oil pressure.When some accidents appear, The digital Protector can shut down immediately, giving the battery voltage alarm and DC electrical source alarm. European extremity, steady wiring, and it can easily dismantle and install.
CONTROL PANEL(ADVANCED ONE)
INSIDE OF CONTROL BOX
1. Main technical parameters of Genset
Model of generating sets
CR-60GFQ
Model of engine
CR-6105ZQ
Rated current A
108A
Rated power KW
60kw
Rated speed r/min.
1500
Rated voltage V
400V /230
Rated frequency Hz
50
Supply method
3 phases 4 lines
Excitation method
brushless
Starting method
24V DC starter
Cooling method
water cooled
Speed modulate method
Electronic control
Overall dimension L×B×H(mm)
2100x770x1300mm
2 .Main technical data of Engine
Model of engine
CR6105ZQ
Rated power/speed
71KW/1500rpm
Specific heat consumption
≤11000KJ/KW.h
H2O
no liquid state water vapour in fuel gas
Number and layout of cylinders
6 cylinders inline
Type
Four stroke, water cooled, spark plug ignition
Bore diameter
105mm
Stroke
115mm
Total displacement
6L
Compression ratio
11.5:1
Speed regulation
Electronic governor
Lubricating method
Pressure and splash lubrication
Fuel Gas inlet pressure
0.8kpa-2kpa
1) Adopting advanced Hall ignition sensor and Highly capable ignition system, the engine ignition will be more reliable, and easier to start.
2) Main control parts are all the most advanced imported ones, to make more stable and reliable running.
3) Several gensets can be parallel connection or parallel net, which can increase the total power range. In addition,the gensets can take maintenance in different times,which will make little influence to the normal performance of gensets.
4) Low gas pressure is acceptable, no need to set up specified gas storage tank , which will save the investment and enhance the efficient output power .
5) Self-contained parts of gensets needs few accessories
6) Economical and low-cost running.
Please contact us for more details,thanks!

No comments:

Post a Comment