Dse704 Control Module

The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features.
The DSE704 is an Auto Mains Failure Control Module that offers an excellent range of engine monitoring and protection features. The module has been designed to monitor engine temperature, low oil pressure, fail to start, charge failure, over speed and under speed. When the module detects a fault condition it automatically shuts down the engine. The module also includes two user configurable auxiliary inputs. The module has been designed to automatically start the generator when the mains (utility) power fails. As soon as mains (utility) power is restored the module has been designed to transfer the load back to the mains (utility) supply. The module then instructs the engine to begin the cool down procedure and stopping sequence (user configured).


Further Information
Main Features
Automatic mains (utility) supply monitoring
Automatic shutdown when fault conditions are detected
Manual start
Engine pre-heat
Engine monitoring and protection features
Protected solid state (PSS) outputs
Front panel mounting
Front panel programming
Remote start
LED indicators
Configurable timers
Configurable outputs
Benefits
Transfer’s between mains (utility) and generator power
On-site module configuration to match user requirements
Multiple engine parameters are monitored simultaneously
Operation
The module is operated via three push buttons on the front.
MANUAL - This mode is used to manually start the engine.
AUTO - This mode is used to automatically start the engine. The module will be started by the remote start signal.
STOP - This button is used to stop the engine when it is running in either manual or automatic mode.
Alternative /
Associated Products
DSE4120 - Auto Mains Failure Control Module