GMTI-7100 genset control cabinet

GMTI-7100 genset control cabinetmonitors and displays the operating parameters of the diesel generator and the grid at real time
The model
GMTI-7100
series control cubicles are used for automatic control to emergency supply or stand-by power. The GMTI-7100 series adopts
DACTS701C
generators automatic controller as the main control part, monitors and displays the operating parameters of
the diesel generator and the grid
at real time, and automatically controls the diesel to start and stop and transfers the load.
The cubicle displays the diesel parameters via a wide LCD, and also manually starts and stops the generator by means of the pushbuttons, the diesel parameters can also be edited via the membrane keys on site. The cubicle is used in any condition within the limited value on the data plate. There are some extended configurations provided as speed up and speed down controlpreheatelectron speed regulator control. It acts as the automatic control station for emergency supply .
Features
Auto and manual control modes. On Auto mode, the cubicle monitors the grid and the generator status, automatically controls the generator to start and stop, and automatically controls the
ATS
to transfer the load. On manual mode, the control operation is via manual pushbuttons.
Gathering and displaying the analogue channels: generator voltage, grid voltage, load current, battery volts, coolant temperature, oil pressure, generator speed, frequency, as so on.
Provides shutdown protection on diesel fault conditions.
Configures the parameters values by means of the feather-touch keys on site.
240x128LCD display, feather-touch keys for operator control.
Suitable for the automatic transfer between one-way grid and one-way generator supply.