500kw Cummins diesel generator

500kw Cummins diesel generator
1)Cummins engine
2)ENGGA generator
3)Good quality and reasonable price
XiaMen huadong machine equipment CO,LTD
500kw Cummins diesel generator
Engine: Cummins Alternator:Engga,Leroy somer,Stamford,Marathon for your choice
Control system:DSE5100,DSE5110,DSE5500G for your choice
The following is the specification of Cummins diesel generators:
Generator Set Specifications
Governor Regulation Class
Voltage Regulation, No Load to Full Load
Random Voltage Variation
Frequency Regulation
Random Frequency Variation
Radio Frequency Emissions Compliance
CE / ISO9001
± 0.5%
± 0.5%
Isochronous
± 0.25%
IEC 801.2 through IEC 801.5; MIL STD 461C, Part 9

Engine Specifications
Design
Fuel System
Cylinder Block
Battery Capacity
Starting Voltage
Fuel Filter
Air Cleaner Type
Lube Oil Filter Type(s)
Stroke
Battery Charging Alternator
Standard Cooling System
Bore
Displacement
40 amps
Triple element, spin on fuel filters with water separator
Dry replaceable element
Four spin-on, combination full flow and bypass filters
104°F (40°C) ambient radiator
24-volt, negative ground
Direct injection
4 cycle, V-black, turbo Charged and low temperature after-cooled
158.8 mm (6.25 in.)
190.0 mm (7.48 in.)
60.2 litres (3673 in.³)
Cast iron, 60°V 16 cylinder
2200 amps minimum at ambient temperature 0°F to 32°F (-18°C to 0°C)

Alternator Specifications
AC Waveform Total Harmonic Distortion
Telephone Harmonic Factor (THF)
Telephone Influence Factor (TIF)
Standard Temperature Rise
Stator
Design
Rotor
nsulation System
Alternator Cooling
Phase Rotation
Exciter Type
<50% per NEMA MG1-22.43
<3%
A (U), B (V), C (W)
No load < 1.5%. Non distorting balanced linear load < 5%
Direct drive centrifugal blower fan
PMG (Permanent Magnet Generator)
150º C Standby
Class H
Direct coupled by flexible disc
2/3 pitch
Brushless, 4 pole, drip proof revolving field

Control System
PowerCommand™ 3201 - Generator Set Control
Description
The PowerCommand™ 3201 Control is a microprocessor-based generator set monitoring, and
The PowerCommand™ 3201 generator set control is suitable for use on a wide range of generator
sets in non-paralleling and paralleling applications
digital governing and generator set protective functions.
control system. The control provides an operator interface to the genset, digital voltage regulation,
configuration from 120 to13,800 VAC for for 50Hz or 60Hz operation.
Power for the control is derived from the generator set starting batteries. The control functions over a
voltage range from 8VDC to 35VDC.
The PowerCommand™ Control can be configured for any frequency, voltage and power connection
Major Features
Digital Full Authority Electronic Engine Controls for Cummins HPI-PT fuel systems
Digital Voltage Regulation with 3-phase sensing
AmpSentry™ Protection for true alternator overcurrent protection.
Analog and Digital AC Output Metering.
Battery Monitoring System to sense and warn against a weak battery condition.
Digital Alarm and Status Message Display
Generator set Monitoring: Displays status of all critical engine and alternator generator set functions.
Smart Starting Control System: Integrated fuel ramping to limit black smoke and frequency overshoot,
Advanced Serviceability using InPower, a PC-based software service tool.
PowerCommand Network (optional) Provides LonMark interface to external devices
Control System
Includes all functions to locally or remotely start and stop, and protect the generator set.
Control Switch - RUN/OFF/AUTO
OFF Mode - the generator set is shut down and cannot be started
RUN mode the generator set will execute its start sequence
AUTO mode, the generator set can be started with a start signal from a remote device
LED Indicating Lamps - includes LED indicating lamps for the following functions:
Remote Start Command
Not-in-Auto mode
Common warning
Shutdown