50kW Biogas Generator Set

1>ISO9001, CE
2>AC Three phase, 50Hz
3>Total Electronic Control
4>Each Nm3 fuel could generate 1.8kw
5>One key operation
Biogas generating could reduce the environmental pollution and good for the environment protection.as well, it could ease the contradication between power supply and demand.Biogas generating reduce the cost of production and it enhances the compitiveness of enterprise.
Biogas is made by Methanogen in the closed environment with the definite air temperature,humidity and etc.1 m
3
biogas could generate 2kw.At this present,plentyof biogad is made from rural area and farming industry every year.as well,it produced from urban organic industry effluents,garbage and such industrial plants like distillery,citric acid plants.etc.
Control system :
Intelligent control for the generator and alternative

Advantage Control Technology: Good Economy and Trustworthy Quality

AMICO Natural Gas Engine Power Units adopts the Lean Burn Combustion Technology, closed-loop control and adaptive control technology, precise control of air-fuel ratio, ignition timing parameters such as engine, adaptive gas heat value and fractions. Economy than the domestic product increased by 15% or more, for the user to save fuel costs, engine exhaust temperature than similar products in more than 100 °C decreased greatly improved the reliability of power unit. To provide economic, reliable gas engine power units.



Request to the gas quality of the Generator Sets
Item
Specification
Item
Specification
Fuel CV
≥16MJ/M3
CH4
≥40%
Volume Percentage
Total Sulphur
≤460mg/m3
H2S
≤20mg/m3
Gas Source Pressure
3Kpa-8Mpa


Gas should be treated to be with no liquid, impurity particles smaller than 0.005mm, content no more than 0.03g/m3
Attention: Gas Volume under: 101.3KPa.20°C for standard.




Genset
Fuel
Biogas
Genset Model
50GF-ZC-AMD
Prime Rating
kW
50 kW
kVA
62.5kVA
Standby Power
kW
55 kW
kVA
68.75kVA
Gas consumption
0.65Nm
3
/ KW.h

Engine
Engine Model
EQD70N
Bore*Stroke(mm)
6-105*120
displacement(L)
6.234
Starting Method
24 VDC Electric Start
Intake Method
Naturally aspirated
Fuel Control
Oxygen sensor closed loop control
Ignition Control
Electronically controlled independent cylinder high-energy ignition
Speed Control
Electronic Speed governing
rpm Rated Speed
1500
Cooling Method
Closed- Loop water cooling
Alternater
Alternater Model

Rated Voltage
230/400
Rated Current
90.2
Rated Frequency
50 or 60 Hz
Supply Connection
3Phases 4 Lines
Rated Power Factor
0.8(Delay)

Spec
Net weght kg
1000
Dimension (L×W×H)mm
2170×900×1400



More Technology specifications please inquiry us with out any hesitates.